YO360-Pro (R2W)
- Precise Temperature Control, Ultimate Comfort
- Touchscreen
- Enhanced Precise Temp Control
- Full Smart Linkage
- Multi Mode Switch
Features
Run Your Home from Your Phone
Phone-Centered Control System for Full-Range Automation of Your Whole Connected Home
Bluetooth Version
We use Bluetooth 4.2 (also sometimes referred to as Bluetooth Low Energy or BLE) as the core processor of our products.
Compatible Devices
We support all Smart Ready products with our application installed. Please click here to get the growing list.
iOS Support
We support Android 7.0 and above, ios 13.0 and above.
Android Support
We support Android 4.3 or above versions. It's the first Android version with Bluetooth Smart support which has just been released on Aug 2013.
| General | ||
| Product Name |
Smart Thermostat - Fan Coil Unit
|
|
| Model |
YO360-Pro (R2W)
|
|
| Socket Type |
Socket 86
|
|
| Revision |
V7.0
|
|
| Compliance |
CE, FCC, RoHS
|
|
| Manufacturer |
Designed by Yoswit in Hong Kong, China / Assembled in Guangdong, China
|
|
| Dimensions | ||
| Product Size |
|
|
| mechanical | ||
| Operating Temperature |
-10-49℃
|
|
| Operating Humidity |
0-95% RH, Non-Condensing
|
|
| Operating Environment |
Interior
|
|
| Operation |
APP / Manual
|
|
| Display |
2.8 inches
|
|
| Ingress Protection (IP) |
20
|
|
| External Temperature Sensor |
NTC 10K (Optional)
|
|
| Electrical | ||
| Operation Power |
100-240V AC (50/60Hz)
|
|
| Max. Load |
≤5A (Resistive), ≤2A (Inductive)
|
|
| Power Consumption |
≤2W
|
|
| Temperature Display Range |
0-49℃
|
|
| Temperature Set Point Range |
5-35℃
|
|
| Temperature Set Point |
1℃
|
|
| Temperature Accuracy |
±1℃
|
|
| Humidity Display Range |
0-99%
|
|
| Humidity Accuracy |
±3%
|
|
| Application |
2-Pipe / 4-Pipe
|
|
| Bluetooth | ||
| Frequency |
2.4GHz
|
|
| Connection |
WiFi 2.4G / BLE 4.2
|
|
| Range |
Open area: >50m / Interior: 3-20m
|
|
| Package | ||
| What's in the Box |
|
|
WARNING!
Disconnect Power
To prevent serious shock or electrocution, always disconnect the power at the service panel before installation. Only licensed electricians should carry out the installation.
Basic Installation
1
Remove the old thermostat and disconnect the wires, please make sure that there is about 5mm of bare wire exposing.
2
Insert a small, flat screwdriver into the notches on the wall plate and twist gently to pry it from the frame to remove the wall plate.
3
Connect the wires to the thermostat case. Make sure that the wires are secure.
Warning
To reduce the risk of electric shock, the unit shall be properly grounded in accordance with local regulations or codes. Failure to connect the ground wire will result in an unsafe installation that could lead to personal injury.
4
Fasten the thermostat on the wall by placing the proper wall mount components.
5
Test your thermostat by tapping 2 to 3 times. Your devices will be on/off.
6
Snap the wall plate onto the frame. There are four click-stops for adjusting the fit of the wall plate to the thermostat and the wall.
Installation complete.
Download the Yoswit App to your smart device and enjoy it now!
Yoswit will automatically detect the switch and add it to your device list.
| Downloads | ||
| Certification | ||
| User Manual | ||
| Data Sheet | ||
| Leaflet | ||
| Yoswit App |
|
|
| Yoswit App (Android Apk) | ||